Coloured oils for timber decks from Osmo. Transparent, satin, high quality wood finishes based on natural oils. Designed to meet the demands of exposed, exterior timber decking.
Osmo Decking Oils are easy to apply, maintain and rejuvenate. In full weather conditions, a rejuvenation coat would be required every 12-18 months, based on an initial 2 coat application. Where the deck is protected by a roof, and is not exposed to full weather, re-coat approximately every 2 years.
FINISH
Wood grain and character remains visible
Transparent
Safe for animals and plants when dry
PROTECTION
Highly water and dirt resistant
Reduces wood swelling and shrinkage
Microporours breathable finish which won't crack, peel, flake or blister
APPLICATION & MAINTENANCE
Easy to apply
Microporous breathable finish which does not crack, peel or flake
Recoat is easy. Just clean, allow to dry and recoat. Sanding is not normally necessary
USES FOR OSMO WOOD WAX
Timber decking and cladding
Outdoor timber structures
PRODUCT DETAILS
Coverage: Approximately 20-24 square metres per litre on hardwoods. Less on softwoods
Application: Good quality floor brush
Drying Time: 12 hours
No of Coats: 2
Storage times: 5 years unopened, 1 year once opened
OSMO ADVICE
Coverage is approximately 20-24 square metres per litre on new dressed hardwoods. On new softwoods such as treated pine, coverage will be approximately 10-12 square metres per litre. Coverage rates on old weathered timbers will be much less.
Osmo's clear Decking Oil 007 has no UV resistance. In full exposure, the clear finish will last 3-4 months before a re-coat is needed. The clear decking oil is more suited for exterior timbers which are under cover, or are fully protected from the elements such as an outdoor room.
