The STEHLE ZW Circular Saw Blades are designed for high work load sizing cuts on solid woods. The ZW Sizing Saw Blade features an ATB (Alternating Bevel) configuration and is suitable for use on table/panel saws and special machines. The blade is specifically designed for industrial ripping, with a chip limiter for knotty timbers and hardwoods. It offers durability, high quality cuts, and a high feed rate, and can be sharpened for extended use. For lighter machines, the HKS Solid and HKS Akku HW blades are recommended for general use.
APPLICATION
Sizing cuts
Rip cut
Cross cut
MACHINE SUITABILITY
Table Saws
Special Machines
MATERIAL SUITABILITY
GLUE LAMINATED TIMBER
SOFTWOOD
HARDWOOD
BOARD
Especially suitable for solid woods with knots due to chip limiter.
TECHNICAL DATA
Blade Diameter 500mm
Blade Bore 30mm
Blade Body 2.8mm
Cutter Kerf 3.8mm
Cutter Configuration Alternate Top Bevel
Hook Angle 20°
Cutter Material HW - Tungsten Carbide
Cut Quality* ▮ ▯▯
Cut Speed ▮▮▮
*Cut quality will improve with higher tooth count.
If not available in this diameter, consider looking to a lower diameter that still meets your cutting depth criteria with a higher tooth count.
SUMMARY
Get precise drillings in soft wood, European hard wood, chipboards & MDF panels with FAMAG Brad Point Drill Bits | 1591 Drill Bit Set. With brad point, 2 cutting edges & 2 taper taps, it's cost-effective & ideal for use with cordless screwdrivers. Upgrade to 1594 for higher demands.
