Hi-vis trousers for maximum comfort and ease of movement, extremely soft and flexible with a slimmer fit. These trousers are engineered to stand up to tough jobs without compromising comfort and fit. The material is a smooth 4-way-stretch fabric which is strong and stretchable in all directions. The trousers have advanced details and practical pockets with CORDURA® reinforcement, a bellowed thigh pocket with a zip, a folding rule pocket, front pockets, back pockets with a flap and functional tool holders, for example loops to hold hammers. The knee pad pocket is reinforced with CORDURA® stretch fabric on the outside and stretch fabric on the inside for increased freedom of movement. Soft, stretch mesh fabric at the back of the knee for good ventilation. CORDURA® reinforcement on the leg hem provides effective protection against wear. Certified under the EN ISO 20471 standard, Class 1 high-visibility protective clothing.
FUNCTION
MAIN MATERIAL
94% polyester, 6% elastane, water repellent finish, 4-way stretch, 320g/m²
FUNCTIONALITY
4-way stretch, Mesh panel back on knee
REINFORCEMENT
CORDURA® reinforced leg bottom, CORDURA® reinforced nail pockets, back pockets and ruler pocket, Cordura®-stretch reinforced kneepockets
DETAILS
Plastic zipper fly
Wide loops at back and sides, Two loops in the sides with a button for hammer holder
Metal buttons
Knife holder with button
D ring in waistline
Inside leg seam with double stitching
D-ring
POCKETS
Back pockets with bellow, reinforced. One with flap
Leg pocket with bellow and flap, with velcro closure and inner telephone pocket in mesh, Leg pocket with zipper
Inset pockets
Knee protection pockets
Nail pockets - extra wide fitted with tool holders and additional tool compartments and extra pockets with zip
Reinforced ruler pocket with knife holder and pen pocket
FINISH
Leg bottom with CORDURA® reinforcement
REFLEX
Reflective tapes around legs, 70 mm wide cut reflective tape, Reflective detail on leg pocket
WAIST SIZE ADVICE AND GUIDELINES
Blaklader Workwear is produced with precision.
- Take your best fitting trousers or shorts, DON'T use the measurement given on the label.
- Pull the waist tight and measure the inside. Measurements of Blaklader are in inches.
- Take the measurement, and double it to find the full length of the waist.
IE. An inside measurement of 40.6cm, will be a 81.2cm waist or 32 inches.
If in doubt, please come in store or contact us.
