DUSS Core Drill | DIA 203W 2000w Core Drill for Dry and Wet

APPLICATIONS

Drilling in reinforced concrete, granite, marble, sandstone, natural stone, masonry, sand-lime brick, poroton, plastic materials and wood

Hand-held or stand mounted drilling, depending on material wet or dry

Drilling through-holes for pipes and power lines or drillings for reinforcing bars

Installation holes for stair and bridge railings or fences

Gardening and landscaping, stonemasonry work

Steel and metal structures, facade construction

FEATURES

Enormous drilling range, hand-held diamond core drilling from a diameter of dia. 12 mm

Efficient drilling performance, especially when drilling small to medium diameters

Comfortable working even in confined spaces, up a ladder or also overhead, thanks to the compact angular design and a machine length of only 39 cm

Time-saving positioning with quick centring bit

Quick release system for rapid core bit change and drill core removal

Safety clutch with anti-lockup system

Ultra-efficient dust extraction during dry drilling

Screw-in auxiliary handle for non-fatiguing, back-saving posture when drilling downwards

Precise preselection and constant control of water flow rate

Rapid changeover from hand-held to stand mounted drilling

Electronic overload protection and soft start

TECHNICAL SPECIFICATION

Rated power 2000 W

Machine weight 6.4 kg

Chuck G 1/2"

Rated speed 1st/2nd/3rd gear 690/1290/2420 rpm

Drilling range with diamond core bit, hand-held, dry dia. 52 - 202 mm

Drilling range with diamond core bit, with BS drill stand, wet dia. 12 - 137 mm

Drilling range with LS hole saw in plastic, hand-held dia. 40 - 162 mm

Drilling range with LS hole saw in plastic, with BST drill stand dia. 40 - 162 mm

Drilling range with LB wood hole saw, hand-held dia. 40 - 162 mm

Drilling range with LB wood hole saw, hand-held dia. 42 - 202 mm

SCOPE OF DELIVERY

Assembled DIA 203 W DIAMOND CORE DRILL

DUSS Storage Case

Operation Manual