Fiddes Premier Wood Varnish is a water based Polyurethane/Acrylic finish, for the surface treatment of wood floors, furniture and internal joinery. Quick-drying, non-yellowing and with excellent durability, Fiddes Premier Wood Varnish is the ideal water based finish for all domestic environments.
Preparation
Ensure all surfaces are clean, dry, and free from any previous finish.
Fill any cracks/knots with Fiddes Floor Filler Gel where required.
Sand the substrate with a fine 120/150 grade sanding paper or 120/150 grit sanding disk, removing all traces of dust.
Application
Ensure all areas to be coated are extremely well ventilated during and after application.
Always test on a small area prior to initial application.
2 coats recommended, 3 on softwood if required.
Apply at room temperature.
Fiddes Premier Wood Varnish is formulated for application directly and does not require thinning.
First Coat
Stir contents thoroughly before and during use, and apply in a warm, well-ventilated room.
Apply THINLY using a good quality bristle or synthetic brush or a short nap microfibre roller and lay EVENLY, following the direction of the grain.
Leave to dry 2-3 hours in warm, dry well-ventilated conditions.
Second Coat
Apply as first coat, THINLY, allowing good ventilation.
Leave to dry 2-3 hours in warm, dry well-ventilated conditions. Clean applicator with water.
Coats
Two Coats, three on softwood if required.
Coverage
8-10 sqm per litre
Recommended for use on
Wooden flooring, furniture and all internal joinery, doors and worktops.
Notes
Always test intercoat adhesion on a small area prior to major application.
Do not apply in high temperatures (25c +)
Longer drying periods may occur during application in cold, damp or humid conditions.
Full cure/hardness will be reached in 7 days.
Store in frost free area.
Sheen
Matt, Satin and Gloss
Sizes
1Lt & 2.5Lt
