KNAPP Connections | K026 METAL Biscuit Connections Slide-In for Furniture Making in Silver Zinc

Sliding connector for high loads

The METAL is a universal connector made of zinc die-casting, and is suitable for load-bearing connections for panels and boards. The connector halves are inserted and screwed into the half-moon groove. Due to the special mold of the connector (notch on the connector’s ends), it is fixed in the groove with pan-head screws (PH screws). To assemble the parts, first insert and then slide them in longitudinal direction into each other. The joint is immediately load bearing and can be further processed.

The METAL connector is suitable for all types of connections, especially for pre-fabricated products, for example backrest for seating furniture. It allows for the products to be shipped disassembled. The connector is self-tightening and no longer visible after assembly. Due to the flaps that can be bent out at the connector’s ends, the displacement of the connector in one or multiple directions can be prevented. A cabinet is just as stable after attaching the back wall with METAL connectors, as if it was glued. Nevertheless, it remains the possibility of disassembly (after removing the back wall).