Introducing Osmo Polyx-Oil Tints, the perfect way to add a subtle hint of colour to your wooden floors and furniture. This innovative product is a variant of the original Osmo Polyx-Oil Satin-Matt, enriched with a small quantity of tint to create a delicate coloured effect.
The combination of natural oils and waxes penetrate deeply into the surface of the timber creating a finish as durable as polyurethane, and far easier to repair and rejuvenate. The mircroprous nature of Osmo's Polyx®-Oil allows timber to breath so that finish will not crack, peel or blister.
FINISH
Transparent or intensive finishes
Based on natural oils and waxes
PROTECTION
Very durable and hard wearing
Extremely stain resistant
Resistant to wine, cola, tea, coffee, water and fruit juices
APPLICATION & MAINTENANCE
Easy to apply, with just 2 thin coats
Microporous breathable finish which does not crack, peel or flake
Spot repairs are easy. No need to sand the whole floor, or piece of furniture
Easy to maintain with Osmo's Wash & Care, Liquid Wax Cleaner and Maintenance Oil
USES FOR OSMO POLYX OIL
Suitable for children's toys, cots and bassinets
Food safe once cured
Furniture, doors, cabinetry
PRODUCT DETAILS
Coverage: Approximately 24 square metres per litre with one coat
Application: Good quality brush, low nap (3-5mm) microfibre roller, lint-free cloth or an Osmo Easy Pad
Drying time: 24 hours
Storage times: 5 years unopened, 1 year once opened
OSMO ADVICE
Osmo Polyx®-Oil Tints should not be considered as a product for staining timber, rather as a finish that will create an even tone to a timber's grain. The final appearance will be largely influenced by the colour of your timber.
The application of additional coats of Osmo Polyx®-Oil Tints to deepen the colour is not recommended. Where a deeper colour tone is required, we recommend using one of the Osmo Woodwax Finish Transparent or Osmo Oil Stain colours instead. Best results are achieved with timbers such as oak, pine, cypress, spruce, and larch.
One coat (maximum two coats are possible on softer woods) is sufficient to produce a durable, faintly coloured finish. After the tint is dry, apply a final coat of one of the clear Osmo Polyx®-Oils.
