ALL PRODUCTS PRODUCT RANGE

HECO Screws | 8mm Countersunk Head Screws HD40 with Full Thread in Silver Zinc

HECO Schrauben Screws and Fasteners Diameter  8mm Finish  Silver Zinc Purpose  Countersunk Head Screw Description  Easy and quick insertion is enabled by the optimally formed thread pitch. Further, the patented...

SPAX Screws | Countersunk Head 8mm Delta-Seal Full Thread with T40 Drive

SPAX Screws Screws and Fasteners Diameter | 8.0 mm Purpose | Delta Seal Countersunk Head Screw Description | Countersunk head screws are suitable for use for construction application, timber engineering, window installation and timber construction as...

FAMAG Extensions | 1639 Machine Extensions with Round Shank

For the extension of all cylinder boring bits or all tools with Ø of shank 8, 10, 12, 13 mm Ø of the shank 10 mm, or 13 x 30 mm. With four attachment screws for fixing. Solid quality. The shank of Ø 13 mm has three clamping...

HECO Screws | 8mm Countersunk Head Screws HD40 with Partial Thread in A2 304 Stainless Steel

HECO-TOPIX®-plus is a real screw highlight, combining concentrated technological expertise and wide range of tangible user benefits in a single wood screw. The secret: Our HECO-TOPIX®-plus combines the best properties of four HECO ranges! With...

FAMAG Drill Bits | 1001 Formwork Drill Bits in 400mm Length

Get the FAMAG Drill Bits 1001 Formwork Drill Bits in 400mm Length for precise drilling. These twist drills with long, cylindrical shank and specially ground roof-like tip can be regrounded easily. Quality according to DIN 7490 and safety regulations...

HECO Screws | 8mm Cylindrical Head Screws T40 with Full Thread in Silver Zinc

The properties of the HECO-TOPIX-plus cylinder head screw are designed specifically for timber construction. It boasts a cylinder head that can be easily sunk into the wood. The full thread allows the transfer of high tensile and compressive forces. At...

HECO Screws | 10mm Countersunk Head Screws HD40 with Partial Thread in Silver Zinc

HECO Schrauben Screws and Fasteners Diameter |  10mm Finish | Silver Zinc Purpose |  Countersunk Head Screw Description | Easy and quick insertion is enabled by the optimally formed thread pitch. Further, the patented...

EUROTEC Screws | KONSTRUX ST 8.5mm Silver Zinc Countersunk Screws with T40 and Full Thread

Maximum load transmission KonstruX fully threaded screws maximise a joint‘s load-bearing capacity with a high thread-extraction resistance in both components. If partially threaded screws are used, the joint‘s load-bearing capacity is limited...

HECO Screws | 8mm Countersunk Head Screws HD40 with Secondary Thread THERM in Silver Zinc

HECO Schrauben Screws and Fasteners Model |  8mm Finish | Silver Zinc Purpose |  Secondary Thread Countersunk Head Description | The double-threaded screw HECO-TOPIX-plus Therm is specially made for the processing of...

SPAX Screws | 8mm T40 Flange Washer Head Screws with Partial Thread in Delta Seal

SPAX Partial Thread Washer Head Screws with in Delta Seal offer higher tightening torques compared to countersunk head screws. Ideal for fastening slats & squared timbers with reduced screwing-in torque and corrosion protection. BENEFITS Higher...

HECO Screws | 10mm Cylindrical Head Screws T40 with Full Thread in Silver Zinc

The properties of the HECO-TOPIX-plus cylinder head screw are designed specifically for timber construction. It boasts a cylinder head that can be easily sunk into the wood. The full thread allows the transfer of high tensile and compressive forces. At...

HECO Screws | 8mm Flange Washer Head Screws T40 with Partial Thread in Silver Zinc

The HECO-TOPIX-plus flange head screw is specially designed for wood construction applications. It features a larger head diameter and is able to transfer considerably higher loads, due to the increased clamping surface. In addition, the amount of...

HECO Screws | 8mm Countersunk Head Screws HD40 with Partial Thread in Silver Zinc

HECO Schrauben Screws and Fasteners Diameter  8mm Finish  Silver Zinc Purpose  Countersunk Head Screw Description  Easy and quick insertion is enabled by the optimally formed thread pitch. Further, the patented...

EUROTEC Screws | 8mm T40 SAWTEC Screws Washer Head with Partial Thread in Silver Zinc

SawTec is a wood screw with special screw tip and saw teeth under the head. The screw has a two-stage cylinder head. The special geometry of the screw tip reduces screw-in torque and also avoids splitting effect when screwing in...

HULTAFORS Level | PV40 40cm Aluminium Spirit Level

HULTAFORS Level PV40 40cm Aluminium Spirit Level Strong, easy to hold aluminium profile measuring 51.5x25.3 mm and weighing 630 g/m. Crush-proof block vials that are highly transparent and durable. Horizontal vial with a +30% magnification lens and...