FIDDES Interior | CONCRETE FINISH Clear Satin Interior for Concrete Sealant

Fiddes Concrete Finish is a quick drying, low VOC, water based finish that stabilises and seals internal concrete surfaces and floors. Formulated to prevent dusting, Concrete Finish improves resistance to dirt, oil and stains.

Recommended for

Use on interior concrete screed and floors.

Application

Apply at room temperature.

Ensure all areas to be coated are well ventilated during and after application.

Always test on a small area prior to initial application.

Fiddes Concrete Finish is formulated for application directly and does not require thinning.

First Coat

Stir contents thoroughly before and during use and apply in a well-ventilated room.

Apply THINLY and EVENLY using a good quality 10mm microfibre roller or brush.

Re-coat in 24hrs.

Clean applicator with water.

Second Coat

Apply as first coat.

Coverage

8-10 sqm per litre

Notes

Allow 21 days before application on new concrete floors

Always test intercoat adhesion on a small area prior to major application.

Do not apply in high temperatures (25c +)

Longer drying periods may occur during application in cold, damp, or humid conditions.

Full cure/hardness will be reached in 7 days.

Store in frost free area.

Sheen 

Matt, Satin and Gloss

Sizes

5Lt