FIDDES Interior | HARDWAX OIL TINTED Antique Interior Timber Oil

FINISH

Maintains natural timber features while adding protection.

Clear available in 4 Sheen levels – Matt, Silk, Satin and Gloss

Customisable – Tinted colours can be mixed together or with the clear

PROTECTION

Highly Durable – More durable than buffed in HWO’s and no need to add additional hardeners

Water Resistant: Tested in accordance with BS 3900 G5

Resistant to wear: Tested in accordance with BS 3900 EI5

Slip Resistant rating of R11 out of the tin – no need to add anything

Suitable for application onto children’s toys – EN 71 – Toy Safety Test

APPLICATION & MAINTENANCE

Easy to use – clear HWO simply rolled on using a short nap roller (see application instructions and YouTube Videos for further details)

No need for special Maintenance Oils

Quick Drying (under 4 hours in correct conditions – fully cured in 7 days)

USES FOR FIDDES HARD WAX OIL

Suitable for all internal timber e.g., floors, kitchen bench tops, furniture, doors & joinery

Suitable for any porous surface e.g., Concrete, cork, stone etc.

PREPERATION

Ensure all surfaces are clean, dry and free from previous finish. Minor gaps and holes can be filled with Fiddes Filler Gel if required. Sand the substrate with a fine 120-150 grade sandpaper. Ensure the surface is clean and remove all traces of dust prior to application.

PRODUCT DETAILS

Coverage: Approximately 20-24 square metres per litre with one coat

FURNITURE : Brush or roll the Tinted Hard Wax Oil and then using a rag, buff into the surface ensuring the entire surface has been covered. Once dry, apply a coat of clear Hard Wax Oil using a short nap microfibre roller. Alternatively, see above instructions to mix Tinted with Clear Hard Wax Oil.

FLOORING : Apply with a brush, trowel or a floor applicator and buff in with a TAN or BEIGE floor pad using a slow speed buffing machine (175 RPM) whilst ragging edges working the product across the floor. Once dry, apply a coat of clear Hard Wax Oil using a short nap microfibre roller. Alternatively, to achieve a similar look without using a buffing machine mix 10% Tinted HWO with clear HWO and roll on using a short nap microfibre roller.

Maximum 2 coats recommended

Drying time: 4 - 6 hours (Cure in 7 Days)

FIDDES ADVICE

When applied using the above methods the Tinted Hard Wax Oil is more of a transparent tint. If the project requires a deeper colour we recommend using a direct stain such as Fiddes Nitro or Light Fast Water Stain before applying a Clear Hard Wax Oil as per instructions.

Depending on the timber substrate, to achieve a close to raw freshly sanded look, we recommend a coat of White Tinted Hard Wax Oil buffed in, followed by a coat of Clear Hard Wax Oil.