SikaBond® - PVA is a high solids, one part Cross-linking PVA which meets the D3/BS EN204 specification. SikaBond® - PVA is an ideal product for bonding a wide range of timber components including tongue and groove solid timber and laminated flooring substrates giving tough, flexible permanent bonding.
Uses
SikaBond® -PVA can be used on most substrates due to its excellent adhesion. These include:
- Timber
- MDF boards
- Particle boards
- Ply woods
Advantages
- Excellent water resistance
- High bond strength within 24 hours
- Suitable for interior and exterior applications
Storage and Shelf Life
Store in a cool, dry place with 25oC maximum condition. This material will keep for at least twelve (12) months.
Instructions for Use
Surface Preparation Surfaces to be bonded should be clean, dry and free from dust and oil. Edges should be squarely machined to ensure maximum contact.
Application
SikaBond® -PVA is to be applied by squeeze bottle, brush or roller. Bonds should be assembled within a few minutes and then tightly clamped or pressed until the adhesive has set. Wipe off adhesive squeeze out immediately after assembly with a dry or lightly damp cloth.
Assemblies are best left overnight before moving or transportation. Maximum bond strength is achieved within 48 hours. Allow floors 24 hours for the adhesive to cure prior to using. SikaBond® -PVA should be used as supplied.
Cleaning Wipe off adhesive squeeze out immediately after assembly with a dry or lightly damp cloth.
