EQUIPMENT PRODUCT RANGE

TANOS Accessory | HARD Foam Bottom Insert SYS³ Accessory for M Systainer

Product information Floor pad with cross cutout M For a flat and continuous surface in the Systainer³ M.Compatible: Systainer³ M, Systainer³ ToolBox MBase material: PE rigid...

TANOS Accessory | CARTRIDGE Base Insert Sys3 Accessory for M337 M437

Product information EPP cartridge insert For clear sorting of used or new cartridges. Holes for storing cartridge tips. EPP insert suitable for all common cartridges.Compatible: Systainer³ M 337 + M 437, systainer® T-Loc IV +...

MAFELL Table Saw | ERIKA 85 Pull-Push Saw with Cross Cut

MAFELL ERIKA 85 Pull-Push Saw with Cross Cut Experience the power of the Carpentry hand-held circular saw MKS 165 Ec, with its heavy-duty 2800 watt motor for extreme 165 mm cutting performance. Equipped with soft start, constant speed under load, speed...

DAWN TOOLS Clamps | 2000mm Aluminium T-BAR Heavy Duty Sash Clamp

DAWN 2000MM ALUMINUM T-BAR SASH CLAMP 61215 These cramps are Australian made and are primarily designed for the cramping of large section work pieces for joint gluing and general applications. Used by carpenters, builders and cabinet makers. The jaws...

DAWN TOOLS Clamps | 1750mm Aluminium T-BAR Heavy Duty Sash Clamp

DAWN 1250MM ALUMINUM T-BAR SASH CLAMP 61215 These cramps are Australian made and are primarily designed for the cramping of large section work pieces for joint gluing and general applications. Used by carpenters, builders and cabinet makers. The jaws...

DAWN TOOLS Clamps | 1250mm Aluminium T-BAR Heavy Duty Sash Clamp

DAWN 1250MM ALUMINUM T-BAR SASH CLAMP 61215 These cramps are Australian made and are primarily designed for the cramping of large section work pieces for joint gluing and general applications. Used by carpenters, builders and cabinet makers. The jaws...

DAWN TOOLS Vice | 450mm Bench Screw Vice for Woodworking

DAWN 28 X 450MM BENCH SCREW VICE SUITS WOODWORK VICES 60261 For those with an interest in making their own carpenters vice, we have the bench screw, which consists of high quality corrosion resistant screw and handle, cast nut and collar. This...

DAWN TOOLS Vice | 75mm Unigrip Drill Press Vice

DAWN 75MM UNIGRIP DRILL PRESS VICE 61560 Specifically designed for drill stands, bench drills and drill presses. Compact and low profile design makes them suitable for a multitude of metal working and woodworking applications. Manufactured from...

TANOS Accessory | SOFT Foam Lid Insert SYS³ Accessory for M Systainer

TANOS SOFT Foam Lid Insert SYS³ Accessory for M Systainer Lid padding for optimal protection of the contents in the systainer®. For an optimal hold on the lid, the padding has an adhesive strip on the back.Compatible: Systainer³ M,...

RUWI Table Extension | Short 77cm Table Extension for Mafell Erika 70/85

RUWI Table Extension 77cm for Mafell Erika 70/85 A real must-have for all Mafell Erika owners - the RUWI table extension. Extend the possibilities of your Mafell Erika underfloor pull saw with the RUWI table extension.The 77cm long extension can be...

CRAFTDREW Press | PPC Pneumatic Joinery Press

PRODUCT DESCRIPTION The press is designed for gluing wood into boards and thickness, i.e. worktops, square timber, beams, stair steps, window sills, seats, and joinery construction elements. The PPC3000 press has a single working area. The pressing...

HULTAFORS Clamps | QCX 450mm Quick Clamp

HULTAFORS QCX 450mm Quick Clamp Compact and user-friendly quick clamp with a one-hand grip, a clamping force of up to 120 kg and a throat depth 20 mm wider than the QC model. Steel rail forged in one piece, with a slim front jaw for increased access in...

RUWI Clamp | 20mm Hole Clamp Bolt with Clamp and Eccentric Clamp

Ruwi Eccentric clamps with clamping bolts with thread M6 These newly developed clamping elements allow free positioning of stop rails, machine vices, or position angles on the clamping plate. Fast, firm and safe clamping. Screw connections are no longer...

RUWI Clamp | 20mm Hole Clamp Bolt with Clamp and Toggle Lever Clamp

Vertical clamp with clamping bolt Quick clamp for the low clamping of workpieces The toggle lever clamp has been optimised for perforated plate systems with Ø 20 mm. It can therefore be used quickly and easily on any suitable multifunctional table...

RUWI Clamp | 20mm Hole Clamp Bolt with Clamp and Horizontal Lever Clamp

Horizontal clamp with clamping bolt Quick clamp for horizontal clamping of workpieces The horizontal clamp is firmly clamped to the table with the clamping bolt in hole grid tables with a bore of 20 mm from above using a hexagon socket key SW6. Thus it...