FAMAG Countersinks | 1775 Countersinks Angle 90° in Set 10, 13, 16, 20, 25mm

  Seven-edged countersink with pointed angle 90°, irregular pitch, with fully ground tool head for finest results   Countersinking in all sorts of wood, also suitable for veneered, laminated panels and many plastics like acrylic glass,...

FAMAG Countersinks | 3533 Handheld ⌀ 12mm Countersinks Angle 90°

Countersink with five edged 90° countersink, with either wooden or plastic handle For fast countersinking by hand in all solid woods and board materials Tool steel The wooden grip lies particularly comfortable in your hand

FAMAG Countersinks | 3533 Handheld ⌀ 16mm Countersinks Angle 90°

Countersink with five edged 90° countersink, with either wooden or plastic handle For fast countersinking by hand in all solid woods and board materials Tool steel The wooden grip lies particularly comfortable in your hand

FAMAG Depth Stop | 1621 Depth Stop for Forstner Bits

Depth stop supported by ball bearing with exchangeable guide bushings for FAMAG Forstner bits and Bormax®. The depth stop is mounted on the stem of the drill bit and the drilling depth has to be adjusted. This makes it possible to drill stud holes...

FAMAG Depth Stop | 1621 Depth Stop Set with Pliers for Forstner Bits

Depth stop supported by ball bearing with exchangeable guide bushings for FAMAG Forstner bits and Bormax®. The depth stop is mounted on the stem of the drill bit and the drilling depth has to be adjusted. This makes it possible to drill stud holes...

FAMAG Dowel Markers | 3685 Machine Dowel Markers ⌀ 10mm in 10 Pack

Conventional dowel marker with centre point, accurately fitting For exact marking of blind dowel holes in all kinds of wood and uncoated boards

FAMAG Dowel Markers | 3685 Machine Dowel Markers ⌀ 6mm in 10 Pack

Conventional dowel marker with centre point, accurately fitting For exact marking of blind dowel holes in all kinds of wood and uncoated boards

FAMAG Dowel Markers | 3685 Machine Dowel Markers ⌀ 8mm in 10 Pack

Conventional dowel marker with centre point, accurately fitting For exact marking of blind dowel holes in all kinds of wood and uncoated boards

FAMAG Dowel Sharpener | 2009 Dowel Sharpener Angle 55° for ⌀ 4-20mm

Dowel sharpener with one edge and parallel shank. Inner angle approx. 55° For sharpening of all dowels so that they can easily be put into the drill holes Dowels must not be lead by hand to the drilling machine!

FAMAG Dowel Sharpener | 2009 Dowel Sharpener Angle 55° for ⌀ 6-30mm

Dowel sharpener with one edge and parallel shank. Inner angle approx. 55° For sharpening of all dowels so that they can easily be put into the drill holes Dowels must not be lead by hand to the drilling machine

FAMAG Drill Bits | 1001 Formwork Drill Bits in 400mm Length

Get the FAMAG Drill Bits 1001 Formwork Drill Bits in 400mm Length for precise drilling. These twist drills with long, cylindrical shank and specially ground roof-like tip can be regrounded easily. Quality according to DIN 7490 and safety regulations...

FAMAG Drill Bits | 1005 Formwork Drill Bits with SDS-Plus Shank in 600mm Length

Get the FAMAG Drill Bits 1005 Formwork Drill Bits in 600mm Length for precise drilling. These twist drills with long, cylindrical shank and specially ground roof-like tip can be regrounded easily. Quality according to DIN 7490 and safety regulations...

FAMAG Drill Bits | 1420 Splinterfree Auger Drill Bits with 460mm Length

Get the FAMAG Drill Bits 1420 Splinterfree Auger Drill Bits for clean and precise drilling in soft woods. With a specially ground tip and premium coating, these 460mm long drill bits ensure minimal friction and tight fit. Ideal for planed or finished...

FAMAG Drill Bits | 1492 TCT Auger Drill Bits with 480mm Length + Morse 2 Shank

Get precise and clean holes in European solid woods with FAMAG Drill Bits 1492 TCT Auger Drill Bits. Featuring a Lewis pattern with thread point, main cutting edge, and spur, morse cone shank No. 2, these bits are perfect for joinery machines. For hard...

FAMAG Drill Bits | 2108 Drill Bits Depth Stop Collar

Clamp collar to be mounted on twist drills, with lateral attachment screw, in order to adjust the drilling depth. If you don't need 10 pcs. of one size, we recommend product line 2108.505 and 2108.507. Ø 3 and 4 mm drill bits with assembled ring...