TOOLING PRODUCT RANGE

FAMAG Countersink Drill Bits | 3577 Spare Rotating Depth Stop for All Sizes

3577.504 Drill-Countersink Set of 4 pcs. Ø 4, 5, 6 mm and Depth Stop in wooden case High quality drill bit - countersink set with rotating depth stop (brass). Depth of pre-drill is adjustable. Countersink angle 60° This set is...

FAMAG Countersinks | 1775 Countersinks Angle 90°

  Seven-edged countersink with pointed angle 90°, irregular pitch, with fully ground tool head for finest results   Countersinking in all sorts of wood, also suitable for veneered, laminated panels and many plastics like acrylic glass,...

FAMAG Countersinks | 1775 Countersinks Angle 90° in Set 10, 13, 16, 20, 25mm

  Seven-edged countersink with pointed angle 90°, irregular pitch, with fully ground tool head for finest results   Countersinking in all sorts of wood, also suitable for veneered, laminated panels and many plastics like acrylic glass,...

FAMAG Countersinks | 3533 Handheld ⌀ 12mm Countersinks Angle 90°

Countersink with five edged 90° countersink, with either wooden or plastic handle For fast countersinking by hand in all solid woods and board materials Tool steel The wooden grip lies particularly comfortable in your hand

FAMAG Countersinks | 3533 Handheld ⌀ 16mm Countersinks Angle 90°

Countersink with five edged 90° countersink, with either wooden or plastic handle For fast countersinking by hand in all solid woods and board materials Tool steel The wooden grip lies particularly comfortable in your hand

FAMAG Depth Stop | 1621 Depth Stop for Forstner Bits

Depth stop supported by ball bearing with exchangeable guide bushings for FAMAG Forstner bits and Bormax®. The depth stop is mounted on the stem of the drill bit and the drilling depth has to be adjusted. This makes it possible to drill stud holes...

FAMAG Depth Stop | 1621 Depth Stop Set with Pliers for Forstner Bits

Depth stop supported by ball bearing with exchangeable guide bushings for FAMAG Forstner bits and Bormax®. The depth stop is mounted on the stem of the drill bit and the drilling depth has to be adjusted. This makes it possible to drill stud holes...

FAMAG Dowel Markers | 3685 Machine Dowel Markers ⌀ 10mm in 10 Pack

Conventional dowel marker with centre point, accurately fitting For exact marking of blind dowel holes in all kinds of wood and uncoated boards

FAMAG Dowel Markers | 3685 Machine Dowel Markers ⌀ 6mm in 10 Pack

Conventional dowel marker with centre point, accurately fitting For exact marking of blind dowel holes in all kinds of wood and uncoated boards

FAMAG Dowel Markers | 3685 Machine Dowel Markers ⌀ 8mm in 10 Pack

Conventional dowel marker with centre point, accurately fitting For exact marking of blind dowel holes in all kinds of wood and uncoated boards

FAMAG Dowel Sharpener | 2009 Dowel Sharpener Angle 55° for ⌀ 4-20mm

Dowel sharpener with one edge and parallel shank. Inner angle approx. 55° For sharpening of all dowels so that they can easily be put into the drill holes Dowels must not be lead by hand to the drilling machine!

FAMAG Dowel Sharpener | 2009 Dowel Sharpener Angle 55° for ⌀ 6-30mm

Dowel sharpener with one edge and parallel shank. Inner angle approx. 55° For sharpening of all dowels so that they can easily be put into the drill holes Dowels must not be lead by hand to the drilling machine

FAMAG Drill Bits | 1001 Formwork Drill Bits in 400mm Length

Get the FAMAG Drill Bits 1001 Formwork Drill Bits in 400mm Length for precise drilling. These twist drills with long, cylindrical shank and specially ground roof-like tip can be regrounded easily. Quality according to DIN 7490 and safety regulations...

FAMAG Drill Bits | 1005 Formwork Drill Bits with SDS-Plus Shank in 600mm Length

Get the FAMAG Drill Bits 1005 Formwork Drill Bits in 600mm Length for precise drilling. These twist drills with long, cylindrical shank and specially ground roof-like tip can be regrounded easily. Quality according to DIN 7490 and safety regulations...

FAMAG Drill Bits | 1410 Lewis Auger Drill Bits with Screw Thread

"Lewis" pattern, crest of thread, main cutting edge and taper tap in premium quality. Version with stepped head and hexagonal shank from Ø 8mm For drilling deep holes in soft wood and European hard wood with power drill and joinery machine. <...