FAMAG Depth Stop | 1621 Depth Stop for Forstner Bits

Depth stop supported by ball bearing with exchangeable guide bushings for FAMAG Forstner bits and Bormax®. The depth stop is mounted on the stem of the drill bit and the drilling depth has to be adjusted. This makes it possible to drill stud holes...

FAMAG Depth Stop | 1621 Depth Stop Set with Pliers for Forstner Bits

Depth stop supported by ball bearing with exchangeable guide bushings for FAMAG Forstner bits and Bormax®. The depth stop is mounted on the stem of the drill bit and the drilling depth has to be adjusted. This makes it possible to drill stud holes...

FAMAG Dowel Markers | 3685 Machine Dowel Markers ⌀ 10mm in 10 Pack

Conventional dowel marker with centre point, accurately fitting For exact marking of blind dowel holes in all kinds of wood and uncoated boards

FAMAG Dowel Markers | 3685 Machine Dowel Markers ⌀ 6mm in 10 Pack

Conventional dowel marker with centre point, accurately fitting For exact marking of blind dowel holes in all kinds of wood and uncoated boards

FAMAG Dowel Markers | 3685 Machine Dowel Markers ⌀ 8mm in 10 Pack

Conventional dowel marker with centre point, accurately fitting For exact marking of blind dowel holes in all kinds of wood and uncoated boards

FAMAG Dowel Sharpener | 2009 Dowel Sharpener Angle 55° for ⌀ 4-20mm

Dowel sharpener with one edge and parallel shank. Inner angle approx. 55° For sharpening of all dowels so that they can easily be put into the drill holes Dowels must not be lead by hand to the drilling machine!

FAMAG Dowel Sharpener | 2009 Dowel Sharpener Angle 55° for ⌀ 6-30mm

Dowel sharpener with one edge and parallel shank. Inner angle approx. 55° For sharpening of all dowels so that they can easily be put into the drill holes Dowels must not be lead by hand to the drilling machine

FAMAG Drill Bits | 1001 Formwork Drill Bits in 1000mm Length

Get the FAMAG Drill Bits 1001 Formwork Drill Bits in 400mm Length for precise drilling. These twist drills with long, cylindrical shank and specially ground roof-like tip can be regrounded easily. Quality according to DIN 7490 and safety regulations...

FAMAG Drill Bits | 1001 Formwork Drill Bits in 400mm Length

Get the FAMAG Drill Bits 1001 Formwork Drill Bits in 400mm Length for precise drilling. These twist drills with long, cylindrical shank and specially ground roof-like tip can be regrounded easily. Quality according to DIN 7490 and safety regulations...

FAMAG Drill Bits | 1001 Formwork Drill Bits in 600mm Length

Get the FAMAG Drill Bits 1001 Formwork Drill Bits in 400mm Length for precise drilling. These twist drills with long, cylindrical shank and specially ground roof-like tip can be regrounded easily. Quality according to DIN 7490 and safety regulations...

FAMAG Drill Bits | 1005 Formwork Drill Bits with SDS-Plus Shank in 600mm Length

Get the FAMAG Drill Bits 1005 Formwork Drill Bits in 600mm Length for precise drilling. These twist drills with long, cylindrical shank and specially ground roof-like tip can be regrounded easily. Quality according to DIN 7490 and safety regulations...

FAMAG Drill Bits | 1410 Lewis Auger Drill Bits with Screw Thread

"Lewis" pattern, crest of thread, main cutting edge and taper tap in premium quality. Version with stepped head and hexagonal shank from Ø 8mm For drilling deep holes in soft wood and European hard wood with power drill and joinery machine. <...