ALL PRODUCTS PRODUCT RANGE

HECO Screw Anchor | 10mm T40 Countersunk Head Screw Anchor with Full Thread in A4 316 Stainless Steel

The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced...

HECO Screws | 8mm Flange Washer Head Screws T40 with Full Thread in HP Coated

The HECO-TOPIX-plus post screw is ideal for the fastening of wood components on wood connectors like base plates, post supporters or rammed base studs. The flange head ensures a planar pressing against the timber connector. The reinforced shaft secures...

HECO Screws | 8mm Flange Washer Head Screws T40 with Full Thread in Silver Zinc

The HECO-TOPIX-plus flange head screw is specially designed for wood construction applications. It features a larger head diameter and is able to transfer considerably higher loads, due to the increased clamping surface. In addition, the amount of...

HECO Screws | 8mm Cylindrical Head Screws T40 with Full Thread in Silver Zinc

The properties of the HECO-TOPIX-plus cylinder head screw are designed specifically for timber construction. It boasts a cylinder head that can be easily sunk into the wood. The full thread allows the transfer of high tensile and compressive forces. At...

EUROTEC Screws | 8mm T40 TOPDUO Screws Cylindrical Head with Secondary Thread in Silver Zinc

Topduo Cylinder Head Screws The Topduo Cylinder Head is a high-performance screw designed for fastening over-rafter insulation with thicknesses up to 300 mm. Its unique features make it an ideal solution for timber-frame construction, offering a range of...

EUROTEC Screws | KONSTRUX ST 8.5mm Silver Zinc Countersunk Screws with T40 and Full Thread

Maximum load transmission KonstruX fully threaded screws maximise a joint‘s load-bearing capacity with a high thread-extraction resistance in both components. If partially threaded screws are used, the joint‘s load-bearing capacity is limited...

HECO Screws | 8mm Flange Washer Head Screws T40 with Full Thread in A2 304 Stainless Steel

The HECO-TOPIX-plus flange head screw is specially designed for wood construction applications. It features a larger head diameter and is able to transfer considerably higher loads, due to the increased clamping surface. In addition, the amount of...

HECO Screw Anchor | 7.5mm T40 Countersunk Head Screw Anchor with Full Thread in Silver Zinc

The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced...

HECO Drive Bits | HD40 Drive Bits in 25mm Length for ¼ Shank

DESCRIPTION At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with...

SPAX Screws | 8mm T40 Flange Washer Head Screws with Partial Thread in Delta Seal

SPAX Partial Thread Washer Head Screws with in Delta Seal offer higher tightening torques compared to countersunk head screws. Ideal for fastening slats & squared timbers with reduced screwing-in torque and corrosion protection. BENEFITS Higher...

HECO Screws | 10mm Cylindrical Head Screws T40 with Full Thread in Silver Zinc

The properties of the HECO-TOPIX-plus cylinder head screw are designed specifically for timber construction. It boasts a cylinder head that can be easily sunk into the wood. The full thread allows the transfer of high tensile and compressive forces. At...

HECO Screws | 8mm Flange Washer Head Screws T40 with Partial Thread in Silver Zinc

The HECO-TOPIX-plus flange head screw is specially designed for wood construction applications. It features a larger head diameter and is able to transfer considerably higher loads, due to the increased clamping surface. In addition, the amount of...

EUROTEC Screws | 8mm T40 SAWTEC Screws Washer Head with Partial Thread in Silver Zinc

SawTec is a wood screw with special screw tip and saw teeth under the head. The screw has a two-stage cylinder head. The special geometry of the screw tip reduces screw-in torque and also avoids splitting effect when screwing in...

HECO Screw Anchor | 7.5mm T40 Flange Washer Head Screw Anchor with Full Thread in Silver Zinc

The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced...

HECO Screws | 8.5mm Cylindrical Head Screws T40 with Secondary Thread in Silver Zinc

The HECO-TOPIX-plus CombiConnect is an ETA-certified double-threaded screw, specially developed for the transmission of high compressive and tensile loads in wood construction applications. It features two threads with different thread-pitches, and...