ALL PRODUCTS PRODUCT RANGE

FAMAG Dowel Sharpener | 2009 Dowel Sharpener Angle 55° for ⌀ 4-20mm

Dowel sharpener with one edge and parallel shank. Inner angle approx. 55° For sharpening of all dowels so that they can easily be put into the drill holes Dowels must not be lead by hand to the drilling machine!

FAMAG Drill Bits | 1575 Brad Point Drill Bits for Stairbuilding with Extended Centre Point

FAMAG 1575 Brad Point Drill Bits for stairbuilding with extended centre point. Features extra long brad point, 2 main cutting edges, 2 spurs, and 4 grooves on the spiral. Ideal for drilling paling fences in stringers or handrails of staircases. Limitedly...

FAMAG Drill Bits | 1593 Brad Point Drill Bits with TCT Set ⌀ 3, 4, 5, 6, 8 mm

Get the FAMAG 1593 Brad Point Drill Bits with TCT for precise and clean drilling in hard wood, laminated chipboards, and plastics. With 2 main cutting edges and 2 spurs, it's a professional tool with a long service life at a fair price. Perfect for...

FAMAG Drill Bits | 1594 Brad Point Drill Bits Set Ø 3, 4 ,5, 6, 7, 8, 9, 10mm in Solid Timber

Introducing FAMAG 1594 Brad Point Drill Bits, the premium choice for precise drilling in hard wood and some plastics. With fully ground quality, 2 cutting edges, 2 spurs, and specially ground spiral for excellent chip removal, it offers premium quality...

FAMAG Drill Bits | 1599 Brad Point Drill Bits Set ⌀ 3, 4 ,5, 6, 7, 8, 9, 10, 11, 12 mm in 150mm Length

Discover the FAMAG 1599 Brad Point Drill Bits, a premium quality, long version with fully ground 150mm length. Featuring 2 main cutting edges and 2 spurs, these drill bits are designed for exact drilling in all hard wood materials and some plastics. The...

FAMAG Drill Bits | 2596 Twist Drills with Short Version Set ⌀ 3, 4 ,5, 6, 7, 8, 9, 10 mm with 1/4" Shank

One-piece twist drill bit, fully ground from the solid, short version with hexagonal shank for bit holder (1/4“; C 6,3), polished section of the surface of the cone 118°, blank ground For drilling alloyed and not alloyed steel and cast steel up...

FAMAG Drill Bits | 2597 Twist Drills with Long Version Set 3, 4 ,5, 6, 8 mm with 1/4" Shank

One-piece twist drill bit, fully ground from the solid, short version with hexagonal shank for bit holder (1/4“; C 6,3), polished section of the surface of the cone 118°, blank ground For drilling alloyed and not alloyed steel and cast steel up...

FAMAG Forstner Bit | 1622 BORMAX Tool Steel Forstner Bit . Set 35, 40, 45, 50 mm and Box.

The FAMAG Werkzeugfabrik Bormax 2.0 Forstner Bits are designed for boring and countersinking in timber. These Forstner bits feature a center point with cutting character and two main cutting edges that are staggered and grooved in reverse order. This...

FAMAG Router Bits | 3382 ASSORTMENT Plunge Router Bits 12 Pieces with 8mm Shank

FAMAG Router Bits Model | 3382.812 Purpose | 8mm Shank Router Bits Description | Every router bit finds its safe place in the durable plastic box. Due to the detailed labelling and organizer, you can see the profile of each cutter and its dimensions...

FIDDES Cleaner | WOOD SURFACE Cleaner Spray

Fiddes Surface Cleaner is the ideal maintenance product for all timber surfaces. Whether it’s a polished floor or a beautifully stained benchtop, Fiddes Surface Cleaner is the perfect solution. Fiddes Surface Cleaner is a non abrasive rinse free...

FIDDES Interior | NITRO STAINS Coal Interior Timber Staining

Nitro Stains are specifically formulated for timber floors but can also be used on any timber surface. They offer excellent even penetration and rich depth of colour. Suitable for use under Fiddes Hard Wax Oil or Lacquers. Nitro Clear/Thinners can be...

FIDDES Interior | TEAK OIL Clear Interior for Timber Protection

Based on special vegetable oils and solvents to give a clear penetrating seal & finish to Teak, Cedar and other bare woods to nourish interior and exterior wood. Check out StopLoss Bags for the perfect solution to keeping your left over...

HECO Drive Bits | CLICFIX Quick Change Drive Bits Holder with ¼ Shank

DESCRIPTION The magnetic HECO-ClicFix quick change tool holder ensures a fast and easy inclusion and secure holding of the bit. PRODUCT STRENGTHS Easy and quick insertion of the bit Magnetic E 6,3 shape (DIN 3126) Anodised aluminium

HECO Drive Bits | HD10 Drive Bits in 25mm Length for ¼ Shank

DESCRIPTION At the construction site, every bit of help is welcome, and work is much easier when you have a free hand. So having magnetic bits that hold the screw on the tool are a huge help. And what’s even better; this is now possible with...

HECO Screw Anchor | 5mm T25 Countersunk Head Screw Anchor with Full Thread in Silver Zinc

The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced...