ALL PRODUCTS PRODUCT RANGE

FAMAG Plug Cutter | 1616.1 TCT Plug Cutter with Cutting Teeth

Create perfect wood plugs in hardwood with FAMAG TCT Plug Cutter. Made from Tool Steel, it has cutting teeth and twofold ground main cutting edges for precise fitting. The effective length of the plug is max. 70mm, ideal for filling knot holes or fixing...

FAMAG Depth Stop | 1621 Depth Stop for Forstner Bits

Depth stop supported by ball bearing with exchangeable guide bushings for FAMAG Forstner bits and Bormax®. The depth stop is mounted on the stem of the drill bit and the drilling depth has to be adjusted. This makes it possible to drill stud holes...

FAMAG Forstner Bits | 1622 BORMAX Forstner Bits Set ⌀ 15, 20, 25 mm with Plug Cutters

The FAMAG Werkzeugfabrik Bormax 2.0 Forstner Bits are designed for boring and countersinking in timber. These Forstner bits feature a center point with cutting character and two main cutting edges that are staggered and grooved in reverse order. This...

FAMAG Plug Cutter | 1616 Tool Steel with Cutting Teeth Set ⌀ 15, 20, 25, 30, 35mm

Create perfect wood plugs with FAMAG Plug Cutter. Made from Tool Steel, it has cutting teeth and twofold ground main cutting edges for precise fitting. The effective length of the plug is max. 70mm, ideal for filling knot holes or fixing wood damage...

FAMAG Plug Cutter | 1616 Tool Steel with Cutting Teeth

Create perfect wood plugs with FAMAG Plug Cutter. Made from Tool Steel, it has cutting teeth and twofold ground main cutting edges for precise fitting. The effective length of the plug is max. 70mm, ideal for filling knot holes or fixing wood damage...

FAMAG Drive Extensions | 1598 Drive Extensions Angle 90° for ⌀ 1/4 Shank Set for Drilling, Countersinking and Driving

Solid right-angle-driver with aluminium housing and bevel toothed metal gear wheels (ideal transmission of force). Take-up device for all 1/4“ bits and drilling tools (e.g. product line 1596) with hexagonal shank. Angle of screwing 90°,...

FAMAG Drive Extensions | 1598 Drive Extensions Angle 90° for ⌀ 1/4 Shank

Solid right-angle-driver with aluminium housing and bevel toothed metal gear wheels (ideal transmission of force). Take-up device for all 1/4“ bits and drilling tools (e.g. product line 1596) with hexagonal shank. Angle of screwing 90°,...

FAMAG Drill Bits | 2597 Twist Drills with Long Version Set 3, 4 ,5, 6, 8 mm with 1/4" Shank

One-piece twist drill bit, fully ground from the solid, short version with hexagonal shank for bit holder (1/4“; C 6,3), polished section of the surface of the cone 118°, blank ground For drilling alloyed and not alloyed steel and cast steel up...

FAMAG Drill Bits | 2597 Twist Drills with 1/4" Shank

One-piece twist drill bit, fully ground from the solid, short version with hexagonal shank for bit holder (1/4“; C 6,3), polished section of the surface of the cone 118°, blank ground For drilling alloyed and not alloyed steel and cast steel up...

FAMAG Drill Bits | 2596 Twist Drills with Short Version Set ⌀ 3, 4 ,5, 6, 7, 8, 9, 10 mm with 1/4" Shank

One-piece twist drill bit, fully ground from the solid, short version with hexagonal shank for bit holder (1/4“; C 6,3), polished section of the surface of the cone 118°, blank ground For drilling alloyed and not alloyed steel and cast steel up...

FAMAG Drill Bits | 2596 Twist Drills with Short Version Set ⌀ 3, 4 ,5, 6, 8 mm with 1/4" Shank

One-piece twist drill bit, fully ground from the solid, short version with hexagonal shank for bit holder (1/4“; C 6,3), polished section of the surface of the cone 118°, blank ground For drilling alloyed and not alloyed steel and cast steel up...

FAMAG Drill Bits | 2596 Twist Drills with Short Version with 1/4" Shank

One-piece twist drill bit, fully ground from the solid, short version with hexagonal shank for bit holder (1/4“; C 6,3), polished section of the surface of the cone 118°, blank ground For drilling alloyed and not alloyed steel and cast steel up...

FAMAG Countersinks | 1775 Countersinks Angle 90° in Set 10, 13, 16, 20, 25mm

  Seven-edged countersink with pointed angle 90°, irregular pitch, with fully ground tool head for finest results   Countersinking in all sorts of wood, also suitable for veneered, laminated panels and many plastics like acrylic glass,...

FAMAG Countersinks | 1775 Countersinks Angle 90°

  Seven-edged countersink with pointed angle 90°, irregular pitch, with fully ground tool head for finest results   Countersinking in all sorts of wood, also suitable for veneered, laminated panels and many plastics like acrylic glass,...

FAMAG Hand Tools | 2006 Piercer Hand Tools 6mm with Sharpened Chamfer * Discontinued*

Piercer with continous blade, lacquered wooden handle and striking cap: Piercer with round blade Piercer with a blade of 6 mm, square edged Piercer with sharpened chamfer For piercing into all European solid wood, all laminated and uncoated boards