ALL PRODUCTS PRODUCT RANGE

DUSS Core Drill | DIA 100 W Dry / Wet 1800w Core Drill for Freehand

DUSS DIA 100 W Dry / Wet 1800w Core Drill for Freehand The DUSS Core Drill DIA 100 W is a powerful 1800w tool for freehand drilling in masonry, sand-lime brick, and more, as well as wet drilling in concrete, granite, and marble. With features like quick...

DUSS Core Drill | DIA 203W 2000w Core Drill for Dry and Wet Drilling

DUSS DIA 203W 2000w Core Drill for Dry and Wet Drilling The DUSS Core Drill DIA 203W is a powerful 2000w core drill suitable for both dry and wet drilling. It is ideal for drilling in reinforced concrete, granite, marble, sandstone, natural stone,...

EUROTEC Connections | IDEEFIX 30mm Connectors in Pack of 25

IdeeFix 30 - Hidden Wood Connector The IdeeFix 30 is a high-performance hidden wood connector, designed for use in timber structures in service class 1 and 2. This connector provides superior load absorption for both tensile and transverse loads, making...

EUROTEC Connections | MAGNUS Concealed Connections Milling Jigs

EUROTEC Connections MAGNUS Concealed Connections Milling Jigs Introducing the EUROTEC Connections MAGNUS Concealed Connections Milling Jigs - the ultimate solution for quick, easy, and accurate installation of concealed connections in construction,...

EUROTEC Screws | JUSTITEC 6mm Silver Zinc Countersunk Screws with T25 and Adjusting Thread

The adjusting screw from EUROTEC is a self-drilling screw that is suitable for wood-wood connections where leveling is required. The screw has a scraper groove on the screw tip and allows the distance between the drilled component and...

EUROTEC Screws | KONSTRUX ST 10mm Silver Zinc Countersunk Screws with T50 and Full Thread

Maximum load transmission KonstruX fully threaded screws maximise a joint‘s load-bearing capacity with a high thread-extraction resistance in both components. If partially threaded screws are used, the joint‘s load-bearing capacity is limited...

FAMAG Adapter | 1488 MK2 to 10mm Shank Adapter

Quality classification: ProfiThe description of the tool design: Adapter, external MK2 or Mafell-ZB (inside cylindrical) with two attachment screws. Kombi-Fix inside MK, external cylindrical hexagonTool material: Alloyed tool...

FAMAG Adapter | 1488 MK2 to 13mm Shank Adapter

Quality classification: ProfiThe description of the tool design: Adapter, external MK2 or Mafell-ZB (inside cylindrical) with two attachment screws. Kombi-Fix inside MK, external cylindrical hexagonTool material: Alloyed tool...

FAMAG Drill Bits | 1001 Formwork Drill Bits in 1000mm Length

Get the FAMAG Drill Bits 1001 Formwork Drill Bits in 400mm Length for precise drilling. These twist drills with long, cylindrical shank and specially ground roof-like tip can be regrounded easily. Quality according to DIN 7490 and safety regulations...

FAMAG Drill Bits | 1596 Brad Point Short Drill Bits with ¼ Shank

Get the FAMAG Drill Bits 1596 Brad Point Short Drill Bits Set for lightning-fast tool changes and pre-drilling in wood and plastics. With a hexagonal shank for easy bit holder use, these bits offer smooth chip removal and good handling with cordless...

FAMAG Drill Bits | 1599 Brad Point Drill Bits Set ⌀ 3, 4 ,5, 6, 8, 10, 12 mm in 250mm Length

Discover the FAMAG 1599 Brad Point Drill Bits, a premium quality, long version with fully ground 250mm length. Featuring 2 main cutting edges and 2 spurs, these drill bits are designed for exact drilling in all hard wood materials and some plastics. The...

FAMAG Drill Bits | 2597 Twist Drills with 1/4" Shank

One-piece twist drill bit, fully ground from the solid, short version with hexagonal shank for bit holder (1/4“; C 6,3), polished section of the surface of the cone 118°, blank ground For drilling alloyed and not alloyed steel and cast steel up...

FAMAG Forstner Bit | 1614 BORMAX Tool Steel Imperial Long Version. Centre Point and Centre Drill.

The Bormax® prima with exchangeable pre-drill bit, centre drill bit or guiding pin reduces feed force, friction and heat generation. It delivers clean drilling in various materials and is ideal for inclined bores. The hexagonal shank ensures better...

FAMAG Forstner Bit | 1622 BORMAX Tool Steel Forstner Bit Set 15, 20, 25 mm and 1616 Plug Cutters.

The FAMAG Werkzeugfabrik Bormax 2.0 Forstner Bits are designed for boring and countersinking in timber. These Forstner bits feature a center point with cutting character and two main cutting edges that are staggered and grooved in reverse order. This...

FAMAG Forstner Bit | 1622 BORMAX Tool Steel Forstner Bit Set 20, 25, 30, 35, 40 mm and Box.

The FAMAG Werkzeugfabrik Bormax 2.0 Forstner Bits are designed for boring and countersinking in timber. These Forstner bits feature a center point with cutting character and two main cutting edges that are staggered and grooved in reverse order. This...